Qingdao Dongang Machinery Co.,Ltd-professional in toilet and kitchen paper machinery,facial tissue paper machinery,Maxi roll machinery,napkin paper machinery.
+8613370868387
Address:Huangdao East Road No.11,Laixi,Qingdao,China
Mail:sales@dongangmachinery.com
Full automatic toilet and kitchen paper rewinding machine
Machine Function and characteristics
1.Adopt international advanced PLC programmable control of production process,man-machine interface operation,data set and parametric fault shows on touch screen,automatic stop broken paper
2.Pneumatic loading system put on base paper,Put on paper roll independently equip tension control device.
3.when production paper roll,first tight then loosen,and the degree of tightness can be adjusted.to make product rolls fluffy or tight.
4.the distance of the punching(perforation) can be adjusted.
5.automatic core feeding system, automatic paper roll pusher after rewinding,then rewind the new roll again.
6.Embossing unit:adopt point to point embossing rollers,making the two layers match well,the paper is soft and has clear patterns.embossing pattern is customized according to customer's request and designs,deepth can be 0.8mm-1.2mm
7.Automatic edge-trimming,glue spraying and sealing synchronously in one time,average gluing to all paper length.
8.Leaving 10-18mm tail,easy to rewind again,so reducing short cut waste and save the cost in the long run.
9.Adopt 4 pieces high precision spiral knives,low noise,clear perforation(punching),adopt gearbox to have bigger range.
10.Adopt high quality brand Bearing and eletronic component
2400 type Full automatic toilet and kitchen paper rewinding machine parameter
Jumbo Roll Max Width |
2400/2350mm |
Jumbo Roll Diameter |
Φ1100mm |
Jumbo Roll Inner Diameter |
3inches(76.2mm) |
Finish Product Diameter |
Φ80-φ140mm |
Finish Product Inner Diameter |
φ38-φ48mm |
Perforation Distance |
100-150mm |
Production Speed |
0-180m/min |
Parameter Set |
HMI, Touch Screen |
Pneumatic System |
3HP Air Compressor, Minimum Pressure: 5kg/cm 2Pa(Provide by user) |
Embossing unit |
Steel to rubber |
Total Power |
11KW |
Unwind Stands |
2 Stands |
Unwinding Transmission |
Frequency Stepless Speed Regulation |
Rewinding Unit |
With Core or Coreless |
Dimension |
7800X2700X1720mm |
Weight |
About 4000kg |
1.Full view of the machine
2. Pneumatic lifting the jumbo roll
3.Automatic feeding paper core,can rewind with core or without core
Rewinding with and without core with the unit the finger point to
4.Embossing rollers(Steel to rubber)
depth 0.8-1.0 mm according to embossing pattern
5.Perforation blade
Perforation unit only need to adjust one time in the position the finger point to,
punching distance can be adjusted.
6.Glue lamination unit. The rubber roller is about 70-80 hardness, which the suitable for glue
well distributed, so roller can give glue to the whole paper, not only the central part.
This hand wheel is to control the tension between the two glue roller, through which
can control the glue volume
The paper press roller, to press paper to the glue roller, to make sure glue in the paper.
7.The left picture show is to control the tension of paper, which can control toilet paper roll fluffy
or tight. Air control the right picture cylinder to give pressure to the paper press roller.
8.Machine can automatic unloading product roll, which can connect with the cutting
machine in the future.
9.PLC Control box,man-machine interface
our workshop
Sample embossing pattern